Call: (02) 8681 9790 (02) 8818 4883
The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
- Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- Cable Lasher Parallel Pull Accessory P/N 70467
J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
Related Products
High quality Miller Loose Buffer Tube Stripper/Mid-Span Access Tool 0.9mm to 3.0mm Fiber Optical Stripper
₱0
Quick Details
- Model Number: AUA-05 stripper
- Type: Optical cable stripper, Optical Fibers
- Place of Origin: Shanghai, China
- Brand Name: DSEE
- Use: FTTH
- Warranty Time: 1 year
- Model Number:: wire stripper multi tool
- Access tube sizes: 0.9mm to 3.0mm
- key feature: Shaves precise opening to prevent fiber damage
- original country::: the U.S.A
- Use::: FTTH
- Application:: FTTH FTTB FTTX Network
- Weight:: 1.36 oz (38.5g)
- Application: FTTH
Fiber optic tool SI-01 Cable Sheath Stripper 10~25mm Mid Span Stripping Tool/ Fiber Cable Reamer
₱0
Features:
Online stripping aluminum-polyethylene bonded sheath, steel armor outer sheath and non-metallic reinforcing member cable sheath
The cutter head is made of high-quality materials, making it easier to cut into the cable jacket
Cut-in depth of the cutter head is adjustable to handle different cable thicknesses
Comparing with similar products, the operation is simpler, faster and more convenient
Instructions:
Adjust the depth of the cutter head according to the thickness of the sheath, so that the round hole of the online cable cutter is inserted into the sheath of the cable. At the cutting mark of the cable sheath, grip the handles on both sides of the cable cutter so that the cutter head is embedded in the cable sheath. In the middle, the cutter head is pulled along the sheath to achieve on-line stripping of the cable sheath.
High Precision Fiber Cleaver
₱0
Fiber optic cleavers are cutting tools that make optical fiber end face cuts. Applications for fiber optic cleavers include
networking and telecommunications. They are often used with Fiber Optic Cables, Fiber Optic Connectors, and Fiber Optic Splicers.
The primary function of a fiber optic cleaver is to precisely cut optical fiber. These tools are relied on to cut the fiber as
smoothly as possible to reduce loss of signal. If the cut of the fiber is not a clean perpendicular cut then the rough surfaces results in optical return loss from the scattering or reflection of light.
Senter S120 Power Meter
₱0
· ONU info: SN\PASSWORD\LOID\MAC
· ONU status: Online, long light, OLT break, ONU break, No power, None ONU
· Interaction mode: Support Bluetooth, QR code, barcode and other interaction
methods, realizes auto verification
· Quickly analyzes the actual data from the ONU to the OLT to provide more
optical network information and extended functions
· Compatible with optical power meter, VFL, cable tracing, check line sequence
and other additional functions, with enhanced battery power supply
Optical Fiber Identifier
₱0
Optical Fiber Identifier is an important tool for optical fiber network maintenance, which is used for nondestructive fiber identification work, can be detect in any location of both SM and MM fiber.
Function:
*Direction indication of optical signal, for single mode and multi-mode
*Automatic identification of three signal frequencies (270Hz / 1kHz / 2KHz)
*Four in one universal fixture, online testing, no need to replace the fixture
*Hidden red light source, stable and strong light source, effective with line detection
*Power display
*Automatic shutdown
Specifications
Identified Wavelength Range:800nm-1700nm
Fiber Type:
Identified Signal Type:270Hz/1KHz/2KHz
Display Type:LED
Detector Type: InGaAs
Alkaline Battery:2*No.5 dry battery
Weight:180g
Dimension:240*47*29mm
Round Cable Slitter
₱0
Features:
Rotate the tool by clockwise direction 2-3 times.
Brand Pro'sKit tool assure high quality and safe reliance.
V-shape cable holder gives users a good operating experience.
Users can push the shaft to the left end to get a longitudinal cuts quickly.
Turning the adjusting screw can help users to work with less force on operation.
Application (strip dimension): strip cables from 4.5-25mm (0.18"~1.0") diameter.
The V-shape cutter adjusting nut get right exposed length of blade, which meet the cable thickness.
Optical Light Source (OLS)
₱0
SNP3109 optical light source can provide 1 to 4
output wavelengths to meet specific requirements,
including the 650nm red source and the
1310/1550nm wavelengths for single mode fiber or
the 850/1300nm wavelengths for multimode fiber,
as well as other wavelengths according to customer
needs. Together with the SNP3208 optical power
meter, it is a perfect solution for the fiber optic net-
work characterization.
OPTICAL POWER METER
₱0
This Optical Power Meter is an economical type highly cost-effective portable power meter. It can be used for the optical power measurement within the wavelength 800~1700nm. It also has a wide measurement range which is more than 70dB. It’s designed with the common wavelength calibration points, such as 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm. The instrument is widely used in fiber-optic link construction, testing and maintenance.
Reviews
There are no reviews yet.