Call: (02) 8681 9790 (02) 8818 4883
The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
- Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- Cable Lasher Parallel Pull Accessory P/N 70467
J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
Related Products
Senter S120 Power Meter
₱0
· ONU info: SN\PASSWORD\LOID\MAC
· ONU status: Online, long light, OLT break, ONU break, No power, None ONU
· Interaction mode: Support Bluetooth, QR code, barcode and other interaction
methods, realizes auto verification
· Quickly analyzes the actual data from the ONU to the OLT to provide more
optical network information and extended functions
· Compatible with optical power meter, VFL, cable tracing, check line sequence
and other additional functions, with enhanced battery power supply
ARMOURED CABLE STRIPPER/SLITTER 4 - 10 MM
₱0
Mini and compact, easy to operate and easy to carry Single-mode dual-wavelength: 1310nm/1550nm 3 kinds of modulation frequency: 270Hz/1000Hz/2000Hz The detachable silicone sleeve can effectively protect the machine and avoid damage to the machine due to collision 2.5mm universal interface, suitable for SC/FC/ST interface, LC interface needs to purchase an adapter separately Product list: machine. Adapter. Certificate of conformity. Warranty card. Manual. Packing box
Optical Light Source (OLS)
₱0
SNP3109 optical light source can provide 1 to 4
output wavelengths to meet specific requirements,
including the 650nm red source and the
1310/1550nm wavelengths for single mode fiber or
the 850/1300nm wavelengths for multimode fiber,
as well as other wavelengths according to customer
needs. Together with the SNP3208 optical power
meter, it is a perfect solution for the fiber optic net-
work characterization.
OPTICAL POWER METER
₱0
This Optical Power Meter is an economical type highly cost-effective portable power meter. It can be used for the optical power measurement within the wavelength 800~1700nm. It also has a wide measurement range which is more than 70dB. It’s designed with the common wavelength calibration points, such as 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm. The instrument is widely used in fiber-optic link construction, testing and maintenance.
Fiber Optic Traction/Laying/Puller Machine
₱0
Cable Traction Machine
Municipalities, telecommunications and other enterprises often have to carry out buried pipeline construction and wiring.
In the traditional optical cable and cable construction process, it is difficult and the construction period is tight. Inevita-
bly, a large amount of manpower is required, and the construction period is long.
With technology as the primary productivity, Clusterasia Corp offers an efficient, time-saving and labor-saving cable
tractor that solves a major problem in cable construction.
The cable tractor is suitable for the construction of cable buried pipelines. During the construction process, the machine
always keeps the cable smoothly.
With the help of Cable traction machine, the cable is not stacked, the pressure and tension of the cable are less than the
safety parameters and the cable will not be damaged
DEVISER AE1001 OTDR 1310/1550NM | 80KM
₱0
OTDR is the use of light in optical fiber Rayleigh scattering and Fresnel reflex of backscattering and made integrated precision of photelectric instrument, it is widely used in the maintenance of optical cable lines, construction of optical fiber
length, fiber optic transmission attenuation can be, coupling attenuation measurement and fault location.
Functions:
1.Test the distance between two points and dynamically display the distance between two cursors
2.Test the loss between two points and the constant of the optical fiber and cable
3.Test the joint loss
4.Auto -optimization and quick response
5.Search for the event points automatically
6.The function of wave form storage it can store the wave form data and test condition into the disk and the stored infor
mation also can display again
7. Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly
Ask for price :
FS-3 stripper thermal fiber miller
₱0
Miller clamp is a widely used general tool. It is mainly used for moving tube and coating of fibers, can handle most of the common application. Besides, the handle uses an ergonomic design so that it is more comfortable for long-time operation.
Features:
1. Big hole: Stripping 1.6-3mm to 600-900μm buffer
2. Middle hole: Stripping 600-900μm to 250μm jacket
3. Small hole: Stripping 250μm-125μm fiber
4. Pre-set at the factory, no adjustments needed;
5. Will not scratch or nick glass fiber;
6. All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation;
7. Comfort-grip, ergonomic handles;
8. Lock to hold tool closed when it is not in use.
9. Length: 165 mm, Weight: 122 g
COMWAY A3 FUSION SPLICER
₱0
Comway A3 is a fusion and fiber endface melter, all in one. This is a compact
and powerful tool for SM, MM, DS, NZ, NSDS, BI optical fibers it has cladding
alignment with fixed Vgrooves, and also includes the high performance heater
and ceramic fiber presser
Feature:
● 2 in 1 : a fusion splicer and a fiber endface melter
● Smart ARC control technology provides stable work under any conditions
● Fast and power saving high-performance heater
● The high quality screen ensures clear viewing of results even under bright
sunlight
● Ultra narrow ceramic V-Groove. Suitable for all kinds of applications
● Stable and durable ceramic fiber presser
● Removable large capacity battery. Fully charged performs over 240 times
splicing and heating
Ask for price :
JW3208 Optical Power Meter
₱0
W3208 handheld optical power meter is a compact and an easy-to-use testing Instrument for optical fiber networks, which can be used for absolute optical power measurements. It features ingenious appearance, wide range of power measur ement, high accuracy end user self-calibration function with high performance-to-price ratio
Ask for price :
Reviews
There are no reviews yet.