FS-3 Fiber Stripper Three-port Fiber Optical Stripper Optical Fiber Stripping Pliers Wire Stripper

Miller clamp is a widely used general tool. It is mainly used for moving tube and coating of fibers, can handle most of the common application. Besides, the handle uses an ergonomic design so that it is more comfortable for long-time operation.

Features:

1. Big hole: Stripping 1.6-3mm to 600-900μm buffer

2. Middle hole: Stripping 600-900μm to 250μm jacket

3. Small hole: Stripping 250μm-125μm fiber

4. Pre-set at the factory, no adjustments needed;

5. Will not scratch or nick glass fiber;

6. All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation;

7. Comfort-grip, ergonomic handles;

8. Lock to hold tool closed when it is not in use.

9. Length: 165 mm, Weight: 122 g

8PK-325 Round Cable Slitter

Cutter Slitting And Ringing Hand Tools
Strip cable with 4.5-25mm diameter

ARMOURED CABLE STRIPPER/SLITTER 8 – 28.6 MM

Features:

1.Expert OTDR: Professional measurement, curve/list/map are displayed simultaneously.

2.Auto OTDR: no complex settings, one key test.

3.OPM supports CW/270/330/1k/2kHz frequency identification.

4.VFL and LS can run in the background, multi task can be operated simultaneously.

5.LS supports CW/ modulation mode output with adjustable output power.

6.RJ45 cable tracker of digital radar, stronger anti-jamming ability.

7.Auto OTDR, expert OTDR, event map, OPM, LS, VFL,RJ45 cable sequence, 8.RJ45 cable tracker, RJ45 cable sequence, RJ45 cable length, end face detection, flash light     optical loss test.

9.RJ45 cable sequence, cable length test, up to 300m.

10.One click screen capture, easy to save the interface.

11.Support ILOM.

12.Support SC/APC

• Auto OTDR
• Expert OTDR
• Event Map
• Optical Power Meter (OPM) -50 +26
• Laser Source (LS)
• Visual Fault Locator (VFL) 10m W 10km
• RJ45 Cable Sequence
• RJ45 Cable Tracker
• RJ45 Cable Length (up to 300m)
• End Face Detection
• Support ILOM
• Support SC/APC SC/UPC
• Wavelength 1310/1550
• Dynamic Range 26/24dB
• Test Range 100km Event Blind Zone 2.5m
• ATT Blind Zone 8m
• 4.3 inches IPS TFT LCD Touch Screen
• Lithium Battery 3.7V 4000mAh
• SOR Standard File Format

High Precision Fiber Cleaver

Fiber optic cleavers are cutting tools that make optical fiber end face cuts. Applications for fiber optic cleavers include
networking and telecommunications. They are often used with Fiber Optic Cables, Fiber Optic Connectors, and Fiber Optic Splicers.
The primary function of a fiber optic cleaver is to precisely cut optical fiber. These tools are relied on to cut the fiber as
smoothly as possible to reduce loss of signal. If the cut of the fiber is not a clean perpendicular cut then the rough surfaces results in optical return loss from the scattering or reflection of light.

Signal Fire AI-9 Fiber Fusion Splicer Machine

Signal Fire AI-9 use the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer.