Call: (02) 8681 9790 (02) 8818 4883
V320S Optical Fiber Cleaver Heavy Duty
The V320S high precision cleaver is designed for field use alongside the Sumitomo splicing units. By using a rotating blade for multiple scoring positions enables a blade life of 48,000 cleaves with a cleave angle better than 0.5 degrees. The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting. The V320S high precision cleaver is the latest cleaver . Integral to the unit is a cleave length scale which helps facilitate exact lengths during cleaving.
Features
– Used for Single Fiber Cleaving with Fiber Scrap Collection
– Utilizes an Automatic Anvil Drop for Fewer Required Steps and Better Cleave Consistency
– Prevents Double Scoring of the Fibers – Has Superior Blade Height and Rotational Adjustment
– Precision Blade features 24 blade positions with 2,000 cleavers per position
– Can Be Operated With Minimal Steps
Name | Qty. |
V320s Fiber Cleaver | 1 |
Inner Hexagon | 1 |
Manual | 1 |
Box | 1 |
Specifications
| Applying Fiber | Single Fiber |
| Fiber Type | 0.25/0.9/3.0mm Optical Fiber |
| Coating Diameter | 125um |
| Cleaved Angle | 0.8’ |
| Cleaved Length | 9 – 24mm |
| Mode | Semiautomatic |
| Dimensions (W x D x H) | 58 x 68 x 58mm |
| Blade Life | 48,000 cleaves |
| Weight | =270g |
Operations
- Put Container from the storage position to the work position, pull the slider out of cleaver; open the large and small plate as shownbelow;
- Set the cladding side of a striped and cleaned fiber into the corresponding fiber holder and put into the fixture slot, Note the striped side of fiber should be fixed in the V-Groove, Closet the small plate orderly. Push Slider to the otherside to cut the fiber off;
- Open the large plate and small plate orderly; and take fiber out. Do not touch anywhere.
Daily Using and Maintenance
- Must ensure that the rubber presser foot and the fiber guide groove are clean (no dust and fiber debris). Keep the fiber contact surfaces clean by using alcohol contton or cloth during the process of cleaving.
- Change the angle of blade if cleaving quality descends (usually cleave 1000 to 1500 times), the blade may be worn.
Adjust the Height of blade
- Please unscrew two scews as picture.
- Use hexagonal spanner to loosen.
- Adjust bolt as picture to adjust height of blade.
Replace the blade
- When the blade circulation is used and you cannot improved the cleaving quality by changing the angle of blade and adjusting the height of stud, the blade needs to be replaced.
Explore more products when you click here.
You may like and follow our Facebook Page: Clusterasia Corp. for more updates.
Related Products
KEVLAR ELECTRONIC SCISSOR
₱0
KEVLAR ELECTRONIC SCISSOR
Features
• Lightweight shears ideal for cutting Kevlar® strength members found in fiber optic cable construction
• Ergonomic molded handles provide comfort for both right and left handed users
• One micro-serrated blade reduces slippage for more positive cutting action
• Blades made from high carbon molybdenum and vanadium steel for long life
| Length | 14cm/5.5 inch |
| Material | 3CR13 stainless steel |
| Features | Resistant , tough , corrosion damage, lasting sharpness |
| Characteristic | Non-slip silicone handle , comfort grip , beautiful color lasting |
| Application | Apply to cut every kind of Kevlar of optical fiber, for FTTH site construction, factory production etc.. |
C-CORP 12 IN 1 OTDR
₱0
Features:
1.Expert OTDR: Professional measurement, curve/list/map are displayed simultaneously.
2.Auto OTDR: no complex settings, one key test.
3.OPM supports CW/270/330/1k/2kHz frequency identification.
4.VFL and LS can run in the background, multi task can be operated simultaneously.
5.LS supports CW/ modulation mode output with adjustable output power.
6.RJ45 cable tracker of digital radar, stronger anti-jamming ability.
7.Auto OTDR, expert OTDR, event map, OPM, LS, VFL,RJ45 cable sequence, 8.RJ45 cable tracker, RJ45 cable sequence, RJ45 cable length, end face detection, flash light optical loss test.
9.RJ45 cable sequence, cable length test, up to 300m.
10.One click screen capture, easy to save the interface.
11.Support ILOM.
12.Support SC/APC
- Auto OTDR
- Expert OTDR
- Event Map
- Optical Power Meter (OPM) -50 +26
- Laser Source (LS)
- Visual Fault Locator (VFL) 10m W 10km
- RJ45 Cable Sequence
- RJ45 Cable Tracker
- RJ45 Cable Length (up to 300m)
- End Face Detection
- Support ILOM
- Support SC/APC SC/UPC
- Wavelength 1310/1550
- Dynamic Range 26/24dB
- Test Range 100km Event Blind Zone 2.5m
- ATT Blind Zone 8m
- 4.3 inches IPS TFT LCD Touch Screen
- Lithium Battery 3.7V 4000mAh
- SOR Standard File Format
Buffer Tube Slitter Longitudinal Cable Sheath Cutter
₱0
Buffer Tube slitter Longitudinal Cable Sheath Cutter
High quality Miller Loose Buffer Tube Stripper/Mid-Span Access Tool 0.9mm to 3.0mm Fiber Optical Stripper
₱0
High quality Miller Loose Buffer Tube Stripper/Mid-Span Access Tool 0.9mm to 3.0mm Fiber Optical Stripper
Quick Details
- Model Number: AUA-05 stripper
- Type: Optical cable stripper, Optical Fibers
- Place of Origin: Shanghai, China
- Brand Name: DSEE
- Use: FTTH
- Warranty Time: 1 year
- Model Number:: wire stripper multi tool
- Access tube sizes: 0.9mm to 3.0mm
- key feature: Shaves precise opening to prevent fiber damage
- original country::: the U.S.A
- Use::: FTTH
- Application:: FTTH FTTB FTTX Network
- Weight:: 1.36 oz (38.5g)
- Application: FTTH
NK6800 series Multi Function OTDR
Call for Price
- 7-inch Capacitive touch screen
- Max Dynamic Range is 45dB/43dB(1310nm/1550nm)
- OTDR：MM 850nm/1300nm、SM 1310nm/1490nm/1550nm/1625nm/1650nm
- OTDR/Event map/OPM/LS/VFL/End face detection/Loss test
- Fiber tester instrument, best OTDR of quality
Fiber Optical Distribution Frame ODF Rack mount and Enclosure 12 24 48 96 144 288 core
₱0
Fiber Optical Distribution Frame ODF Rack mount and Enclosure 12 24 48 96 144 288 core
OPTICAL LIGHT SOURCE 1310 /1550 nm (OLS)
₱0
OPTICAL LIGHT SOURCE 1310 /1550 nm (OLS)
Mini and compact, easy to operate, and easy to carry Single-mode dual-wavelength: 1310nm/1550nm 3 kinds of modulation frequency: 270Hz/1000Hz/2000Hz The detachable silicone sleeve can effectively protect the machine and avoid damage to the machine due to collision 2.5mm universal interface, suitable for SC/FC/ST interface, LC interface needs to purchase an adapter separately Product list: machine. Adapter. Certificate of conformity. Warranty card. Manual. Packing box
FIBER OPTIC MICROSCOPE / OPTICAL FIBER END MAGNIFIER
₱0
FIBER OPTIC MICROSCOPE / OPTICAL FIBER END MAGNIFIER
CSW-A80 Splicing Machine High Quality Fiber Fusion Splicer
₱0
CSW-A80 Splicing Machine High Quality Fiber Fusion Splicer
CSW-A80 Fusion Splicer Machine is a sophisticated device used to join two optical fibers end-to-end through a process of aligning and fusing their cores. This process ensures minimal signal loss and back reflection, making it essential for constructing and maintaining high-performance fiber optic networks.
Optical Fiber Identifier
₱0
Optical Fiber Identifier
Optical Fiber Identifier is an important tool for optical fiber network maintenance, which is used for nondestructive fiber identification work, can be detect in any location of both SM and MM fiber.
Function:
- Direction indication of optical signal, for single mode and multi-mode
- Automatic identification of three signal frequencies (270Hz / 1kHz / 2KHz)
- Four in one universal fixture, online testing, no need to replace the fixture
- Hidden red light source, stable and strong light source, effective with line detection
- Power display
- Automatic shutdown
- Specifications
- Identified Wavelength Range:800nm-1700nm
Optical Fiber Identifier
Fiber Type:
- Identified Signal Type:270Hz/1KHz/2KHz
- Display Type:LED
- Detector Type: InGaAs
- Alkaline Battery:2*No.5 dry battery
- Weight:180g
- Dimension:240*47*29mm
Reviews
There are no reviews yet.