Call: (02) 8681 9790 (02) 8818 4883
Buffer tube slitter Longitudinal Cable Sheath Cutter
Fiber optic cable jacket slitter is an efficient and indispensable tool for fiber optic cable termination. It easily slits the PVC cable jacket into two halves before crimping in both field and plant applications. Time is saved and consistency is resulted with this precise and innovative tool.
Step by Step Instructions
Fiber cable slitter is high Precision Slitter to ensure the Integrity of the Fiber, it is usually designed allows jacket or shield slitting on non-fiber optic configurations as well.
Related Products
OPTICAL LIGHT SOURCE 1310 /1550 nm (OLS)
₱0
OPTICAL LIGHT SOURCE 1310 /1550 nm (OLS)
Mini and compact, easy to operate, and easy to carry Single-mode dual-wavelength: 1310nm/1550nm 3 kinds of modulation frequency: 270Hz/1000Hz/2000Hz The detachable silicone sleeve can effectively protect the machine and avoid damage to the machine due to collision 2.5mm universal interface, suitable for SC/FC/ST interface, LC interface needs to purchase an adapter separately Product list: machine. Adapter. Certificate of conformity. Warranty card. Manual. Packing box
NK3200 9 in 1 Pro OTDR
₱1
NK3200 Mini-Pro OTDR combines 9 functions in one device:
-OTDR: 1310/1550nm, 22/24dB, 500m-60km
-Event map
-Light source: 1310/1550nm, >-5dBm
-Optical power meter: 50~+26dBm
-Visual fault locator: >=10mW
-RJ45 Ethernet Cable Sequence
-RJ45 Ethernet Cable Distance
-RJ45 Ethernet Cable Tracker( optional Accessory)
-LED light
It could quickly detect the breakpoint, universal connector, 600 internal
storage, TF card, USB data storage, and built-in 4000mAh lithium bat-
tery, USB charging. It is a good choice for long-term fieldwork.
Features
-Lightweight, portable, cost-effective
-One Key Operation, Legible Test Data,
-Integrated with Visual Fault Locator system, easy to detect fault location of dead Zone
-Dustproof, waterproof, quakeproof, suitable for field maintenance work
-Large capacity battery, long working time, suitable for long time field working
-Suitable for fault location during construction and maintenance of FTTx and access network
OPTICAL POWER METER
₱0
This Optical Power Meter is an economical type highly cost-effective portable power meter. It can be used for the optical power measurement within the wavelength 800~1700nm. It also has a wide measurement range which is more than 70dB. It’s designed with the common wavelength calibration points, such as 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm. The instrument is widely used in fiber-optic link construction, testing and maintenance.
High Precision Fiber Cleaver
₱0
High Precision Fiber Cleaver
Fiber optic cleavers are cutting tools that make optical fiber end face cuts. Applications for fiber optic cleavers include
networking and telecommunications. They are often used with Fiber Optic Cables, Fiber Optic Connectors, and Fiber Optic Splicers.
The primary function of a fiber optic cleaver is to precisely cut optical fiber. These tools are relied on to cut the fiber as
smoothly as possible to reduce loss of signal. If the cut of the fiber is not a clean perpendicular cut then the rough surfaces results in optical return loss from the scattering or reflection of light.
FS-3 Fiber Stripper Three-port Fiber Optical Stripper Optical Fiber Stripping Pliers Wire Stripper
₱0
FS-3 Fiber Stripper Three-port Fiber Optical Stripper Optical Fiber Stripping Pliers Wire Stripper
Miller clamp is a widely used general tool. It is mainly used for moving tube and coating of fibers, can handle most of the common application. Besides, the handle uses an ergonomic design so that it is more comfortable for long-time operation.
Features:
1. Big hole: Stripping 1.6-3mm to 600-900μm buffer
2. Middle hole: Stripping 600-900μm to 250μm jacket
3. Small hole: Stripping 250μm-125μm fiber
4. Pre-set at the factory, no adjustments needed;
5. Will not scratch or nick glass fiber;
6. All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation;
7. Comfort-grip, ergonomic handles;
8. Lock to hold tool closed when it is not in use.
9. Length: 165 mm, Weight: 122 g
8PK-325 Round Cable Slitter
₱0
8PK-325 Round Cable Slitter
Cutter Slitting And Ringing Hand Tools
Strip cable with 4.5-25mm diameter
ARMOURED CABLE STRIPPER/SLITTER 4 - 10 MM
₱0
ARMOURED CABLE STRIPPER/SLITTER 4 – 10 MM
Mini and compact, easy to operate and easy to carry Single-mode dual-wavelength: 1310nm/1550nm 3 kinds of modulation frequency: 270Hz/1000Hz/2000Hz The detachable silicone sleeve can effectively protect the machine and avoid damage to the machine due to collision 2.5mm universal interface, suitable for SC/FC/ST interface, LC interface needs to purchase an adapter separately Product list: machine. Adapter. Certificate of conformity. Warranty card. Manual. Packing box
JOINWIT JW3239C Handheld 10G PON Fiber Optic Power Meter
₱0
Reviews
There are no reviews yet.