Call: (02) 8681 9790 (02) 8818 4883
The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
- Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- Cable Lasher Parallel Pull Accessory P/N 70467
J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
Related Products
Signal Fire AI-9 Fiber Fusion Splicer
₱0
Features:
• Splicing time – 3 S
• Automatic heating time
• Six motors
• Core alignment
• 5 seconds fast splicing
• 15 seconds fast heating
• 5 inch TFT color display
• Built in Power Meter – 850nm/1300nm/1310nm/1490nm/1550nm/1625nm
• Built in Visual Fault Locator
• 7800 mAh high-capacity lithium battery
• Charging time ≤ 3.5 hours
• Continuous splicing and heating about 260 times
• 3 in 1 fiber holder
• Comes with toolbox and stool that can bear up to 100kg
FTTH Tool kit
₱2,700
Fiber Optic stripper
Cable Stripper
Alcohol Bump Bottle
Visual Fault Locator
Optical power meter
Optical Fiber Cleaver
Fiber cutter
Carrying Case/bag
Optical Fiber Identifier
₱0
Optical Fiber Identifier is an important tool for optical fiber network maintenance, which is used for nondestructive fiber identification work, can be detect in any location of both SM and MM fiber.
Function:
*Direction indication of optical signal, for single mode and multi-mode
*Automatic identification of three signal frequencies (270Hz / 1kHz / 2KHz)
*Four in one universal fixture, online testing, no need to replace the fixture
*Hidden red light source, stable and strong light source, effective with line detection
*Power display
*Automatic shutdown
Specifications
Identified Wavelength Range:800nm-1700nm
Fiber Type:
Identified Signal Type:270Hz/1KHz/2KHz
Display Type:LED
Detector Type: InGaAs
Alkaline Battery:2*No.5 dry battery
Weight:180g
Dimension:240*47*29mm
ARMOURED CABLE STRIPPER/SLITTER 4 - 10 MM
₱0
Mini and compact, easy to operate and easy to carry Single-mode dual-wavelength: 1310nm/1550nm 3 kinds of modulation frequency: 270Hz/1000Hz/2000Hz The detachable silicone sleeve can effectively protect the machine and avoid damage to the machine due to collision 2.5mm universal interface, suitable for SC/FC/ST interface, LC interface needs to purchase an adapter separately Product list: machine. Adapter. Certificate of conformity. Warranty card. Manual. Packing box
COMWAY A3 FUSION SPLICER
₱0
Comway A3 is a fusion and fiber endface melter, all in one. This is a compact
and powerful tool for SM, MM, DS, NZ, NSDS, BI optical fibers it has cladding
alignment with fixed Vgrooves, and also includes the high performance heater
and ceramic fiber presser
Feature:
● 2 in 1 : a fusion splicer and a fiber endface melter
● Smart ARC control technology provides stable work under any conditions
● Fast and power saving high-performance heater
● The high quality screen ensures clear viewing of results even under bright
sunlight
● Ultra narrow ceramic V-Groove. Suitable for all kinds of applications
● Stable and durable ceramic fiber presser
● Removable large capacity battery. Fully charged performs over 240 times
splicing and heating
Ask for price :
Round Cable Slitter
₱0
Features:
Rotate the tool by clockwise direction 2-3 times.
Brand Pro'sKit tool assure high quality and safe reliance.
V-shape cable holder gives users a good operating experience.
Users can push the shaft to the left end to get a longitudinal cuts quickly.
Turning the adjusting screw can help users to work with less force on operation.
Application (strip dimension): strip cables from 4.5-25mm (0.18"~1.0") diameter.
The V-shape cutter adjusting nut get right exposed length of blade, which meet the cable thickness.
DEVISER AE1001 OTDR 1310/1550NM | 80KM
₱0
OTDR is the use of light in optical fiber Rayleigh scattering and Fresnel reflex of backscattering and made integrated precision of photelectric instrument, it is widely used in the maintenance of optical cable lines, construction of optical fiber
length, fiber optic transmission attenuation can be, coupling attenuation measurement and fault location.
Functions:
1.Test the distance between two points and dynamically display the distance between two cursors
2.Test the loss between two points and the constant of the optical fiber and cable
3.Test the joint loss
4.Auto -optimization and quick response
5.Search for the event points automatically
6.The function of wave form storage it can store the wave form data and test condition into the disk and the stored infor
mation also can display again
7. Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly
Ask for price :
SC APC Fast Connector
₱0
Fiber Fast Connector is used for field assembled
optical fiber connector, widely used in fiber to the
home (FTTH) access optical networks, to assem-
ble with drop cable quickly.
Application
1.Used to open the FTTH fiber terminal end.
2.In the box, cabinet, such as wiring into the box.
3.Off the back of the accidents such as fiber, mainte
-nance.
4.LAN, wan, data and video transmission.
5.The construction of the fiber end user access and
maintenance.
6.Optical fiber access of mobile base station.
Optical Light Source (OLS)
₱0
SNP3109 optical light source can provide 1 to 4
output wavelengths to meet specific requirements,
including the 650nm red source and the
1310/1550nm wavelengths for single mode fiber or
the 850/1300nm wavelengths for multimode fiber,
as well as other wavelengths according to customer
needs. Together with the SNP3208 optical power
meter, it is a perfect solution for the fiber optic net-
work characterization.
High quality Miller Loose Buffer Tube Stripper/Mid-Span Access Tool 0.9mm to 3.0mm Fiber Optical Stripper
₱0
Quick Details
- Model Number: AUA-05 stripper
- Type: Optical cable stripper, Optical Fibers
- Place of Origin: Shanghai, China
- Brand Name: DSEE
- Use: FTTH
- Warranty Time: 1 year
- Model Number:: wire stripper multi tool
- Access tube sizes: 0.9mm to 3.0mm
- key feature: Shaves precise opening to prevent fiber damage
- original country::: the U.S.A
- Use::: FTTH
- Application:: FTTH FTTB FTTX Network
- Weight:: 1.36 oz (38.5g)
- Application: FTTH
Reviews
There are no reviews yet.