C-CORP 12 IN 1 OTDR

Miller clamp is a widely used general tool. It is mainly used for moving tube and coating of fibers, can handle most of the common application. Besides, the handle uses an ergonomic design so that it is more comfortable for long-time operation.

Features:

1. Big hole: Stripping 1.6-3mm to 600-900μm buffer

2. Middle hole: Stripping 600-900μm to 250μm jacket

3. Small hole: Stripping 250μm-125μm fiber

4. Pre-set at the factory, no adjustments needed;

5. Will not scratch or nick glass fiber;

6. All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation;

7. Comfort-grip, ergonomic handles;

8. Lock to hold tool closed when it is not in use.

9. Length: 165 mm, Weight: 122 g

SNP3109 optical light source can provide 1 to 4
output wavelengths to meet specific requirements,
including the 650nm red source and the
1310/1550nm wavelengths for single mode fiber or
the 850/1300nm wavelengths for multimode fiber,
as well as other wavelengths according to customer
needs. Together with the SNP3208 optical power

meter, it is a perfect solution for the fiber optic net-
work characterization.

Features:

Online stripping aluminum-polyethylene bonded sheath, steel armor outer sheath and non-metallic reinforcing member cable sheath
The cutter head is made of high-quality materials, making it easier to cut into the cable jacket
Cut-in depth of the cutter head is adjustable to handle different cable thicknesses
Comparing with similar products, the operation is simpler, faster and more convenient

Instructions:

Adjust the depth of the cutter head according to the thickness of the sheath, so that the round hole of the online cable cutter is inserted into the sheath of the cable. At the cutting mark of the cable sheath, grip the handles on both sides of the cable cutter so that the cutter head is embedded in the cable sheath. In the middle, the cutter head is pulled along the sheath to achieve on-line stripping of the cable sheath.