Call: +639568659392 +639499836427
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
ShinewayTech SLS-50A Stabilized Laser Source Fiber Light Source 1310 1550nm
|
Model |
SLS-50 |
|||||
|
A |
B |
P |
C |
V |
X |
|
| Wavelength (±20nm) |
1310/1550 |
850/1300 |
1310/1490/ 1550 |
850/1310/ 1550 |
650/1310/ 1550 |
1310/1550/ 1625 |
| Port Number |
1 |
1 |
2 |
2 |
2 |
2 |
| Spectrum Width |
≤5nm |
|||||
| Application Range |
Multimode/Singlemode fibers |
|||||
| Emitter Type |
FP-LD@650,850,1300,1310,1550nm; DFB-LD@1490,1625nm |
|||||
| Output Power |
≥3dBm@650nm; ≥-3dBm@850/1300/1310/1490/1550/1625nm
|
|||||
| Power Stability |
±0.05dB/15min; ±0.10dB/8hr@1310/1490/1550/1625nm; ±0.15 dB/8hr@850/1300nm |
|||||
| Output Mode |
CW, 1Hz@650nm; CW,270Hz,1KHz,2KHz@850/1300/1310/1490/1550/1625nm |
|||||
| Adjustment Range |
6dB (NA at 650nm) |
|||||
| Adjustable Steps |
0.01/0.1/1dB |
|||||
| Auto Wavelength Identification / Switch |
Yes (With ShinewayTech OPM-50/OLT-55) |
|||||
| Output Power Display |
Yes |
|||||
| Connector |
FC/PC (Interchangeable SC, ST) |
|||||
| Power Supply |
Lithium Battery / AC Adapter |
|||||
| Battery Life |
Continuous operation 40 hours; Standby 140 hours |
|||||
| Power Saving |
Auto-off after 5 minutes idle |
|||||
| Operating Temp. |
-20℃~50℃ |
|||||
| Storage Temp. |
-40℃~70℃ |
|||||
| Relative Humidity |
0 ~ 95% (non-condensing) |
|||||
| Weight |
315g (0.69 lbs) |
|||||
| Dimensions (H×W×T) |
177×80×44mm (6.97×3.15×1.73 inch)
|
|||||
Related Products
Fiber Optic Traction/Laying/Puller Machine
₱0
Cable Traction Machine
Municipalities, telecommunications and other enterprises often have to carry out buried pipeline construction and wiring.
In the traditional optical cable and cable construction process, it is difficult and the construction period is tight. Inevita-
bly, a large amount of manpower is required, and the construction period is long.
With technology as the primary productivity, Clusterasia Corp offers an efficient, time-saving and labor-saving cable
tractor that solves a major problem in cable construction.
The cable tractor is suitable for the construction of cable buried pipelines. During the construction process, the machine
always keeps the cable smoothly.
With the help of Cable traction machine, the cable is not stacked, the pressure and tension of the cable are less than the
safety parameters and the cable will not be damaged
JW3208 Optical Power Meter
₱0
W3208 handheld optical power meter is a compact and an easy-to-use testing Instrument for optical fiber networks, which can be used for absolute optical power measurements. It features ingenious appearance, wide range of power measur ement, high accuracy end user self-calibration function with high performance-to-price ratio
Ask for price :
Round Cable Slitter
₱0
Features:
Rotate the tool by clockwise direction 2-3 times.
Brand Pro'sKit tool assure high quality and safe reliance.
V-shape cable holder gives users a good operating experience.
Users can push the shaft to the left end to get a longitudinal cuts quickly.
Turning the adjusting screw can help users to work with less force on operation.
Application (strip dimension): strip cables from 4.5-25mm (0.18"~1.0") diameter.
The V-shape cutter adjusting nut get right exposed length of blade, which meet the cable thickness.
Senter S120 Power Meter
₱0
· ONU info: SN\PASSWORD\LOID\MAC
· ONU status: Online, long light, OLT break, ONU break, No power, None ONU
· Interaction mode: Support Bluetooth, QR code, barcode and other interaction
methods, realizes auto verification
· Quickly analyzes the actual data from the ONU to the OLT to provide more
optical network information and extended functions
· Compatible with optical power meter, VFL, cable tracing, check line sequence
and other additional functions, with enhanced battery power supply
FS-3 stripper thermal fiber miller
₱0
Miller clamp is a widely used general tool. It is mainly used for moving tube and coating of fibers, can handle most of the common application. Besides, the handle uses an ergonomic design so that it is more comfortable for long-time operation.
Features:
1. Big hole: Stripping 1.6-3mm to 600-900μm buffer
2. Middle hole: Stripping 600-900μm to 250μm jacket
3. Small hole: Stripping 250μm-125μm fiber
4. Pre-set at the factory, no adjustments needed;
5. Will not scratch or nick glass fiber;
6. All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation;
7. Comfort-grip, ergonomic handles;
8. Lock to hold tool closed when it is not in use.
9. Length: 165 mm, Weight: 122 g
FTTH Tool kit
₱2,700
Fiber Optic stripper
Cable Stripper
Alcohol Bump Bottle
Visual Fault Locator
Optical power meter
Optical Fiber Cleaver
Fiber cutter
Carrying Case/bag
OPTICAL POWER METER
₱0
This Optical Power Meter is an economical type highly cost-effective portable power meter. It can be used for the optical power measurement within the wavelength 800~1700nm. It also has a wide measurement range which is more than 70dB. It’s designed with the common wavelength calibration points, such as 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm. The instrument is widely used in fiber-optic link construction, testing and maintenance.
Signal Fire AI-9 Fiber Fusion Splicer
₱0
Features:
• Splicing time – 3 S
• Automatic heating time
• Six motors
• Core alignment
• 5 seconds fast splicing
• 15 seconds fast heating
• 5 inch TFT color display
• Built in Power Meter – 850nm/1300nm/1310nm/1490nm/1550nm/1625nm
• Built in Visual Fault Locator
• 7800 mAh high-capacity lithium battery
• Charging time ≤ 3.5 hours
• Continuous splicing and heating about 260 times
• 3 in 1 fiber holder
• Comes with toolbox and stool that can bear up to 100kg
NK3200 9 in 1 Pro OTDR
₱1
NK3200 Mini-Pro OTDR combines 9 functions in one device:
-OTDR: 1310/1550nm, 22/24dB, 500m-60km
-Event map
-Light source: 1310/1550nm, >-5dBm
-Optical power meter: 50~+26dBm
-Visual fault locator: >=10mW
-RJ45 Ethernet Cable Sequence
-RJ45 Ethernet Cable Distance
-RJ45 Ethernet Cable Tracker( optional Accessory)
-LED light
It could quickly detect the breakpoint, universal connector, 600 internal
storage, TF card, USB data storage, and built-in 4000mAh lithium bat-
tery, USB charging. It is a good choice for long-term fieldwork.
Features
-Lightweight, portable, cost-effective
-One Key Operation, Legible Test Data,
-Integrated with Visual Fault Locator system, easy to detect fault location of dead Zone
-Dustproof, waterproof, quakeproof, suitable for field maintenance work
-Large capacity battery, long working time, suitable for long time field working
-Suitable for fault location during construction and maintenance of FTTx and access network
High quality Miller Loose Buffer Tube Stripper/Mid-Span Access Tool 0.9mm to 3.0mm Fiber Optical Stripper
₱0
Quick Details
- Model Number: AUA-05 stripper
- Type: Optical cable stripper, Optical Fibers
- Place of Origin: Shanghai, China
- Brand Name: DSEE
- Use: FTTH
- Warranty Time: 1 year
- Model Number:: wire stripper multi tool
- Access tube sizes: 0.9mm to 3.0mm
- key feature: Shaves precise opening to prevent fiber damage
- original country::: the U.S.A
- Use::: FTTH
- Application:: FTTH FTTB FTTX Network
- Weight:: 1.36 oz (38.5g)
- Application: FTTH
Reviews
There are no reviews yet.