Call: (02) 8681 9790 (02) 8818 4883
Please Call for price
One Click Pen Cleaner for Fiber Optic 2.5mm SC FC and 1.25mm LC
Order Now
One Click Pen Cleaner for Fiber Optic 2.5mm SC FC and 1.25mm LC
- SC fiber optic cleaning pen fiber optic adapter flange clean cleaner One-fiber cleaner,
- Suitable for SC / FC / ST 2.5mm
- Fiber Optic Cleaning Pen
- One click fiber optic pen type smart cleaner, for cleaning the connector ferrule without nicking or scratching the end face.
- SC/FC/ST and LC/MU
- 2 models available, 2.5mm for SC/FC/ST
- 800+ Cleanings per Unit
- Disposable with 800+ cleanings per unit
- Cleaning system rotates 180 for a full sweep
- This cleaning tool cleans the ferrule end faces, removing dust, oil, and other debris without nicking or scratching the end face.
... people are viewing this right now
Compare
One Click Pen Cleaner for Fiber Optic 2.5mm SC FC and 1.25mm LC
The one click fiber optic cleaner pen is easy to use and can be used to clean LC/MU connectors and exposed 1.25mm collars in the fiber optic cable adapter. Simply insert the cleaner into the adapter and push it until you hear a “click”. The push cleaner uses a mechanical push operation to push the optical-grade cleaning tape while rotating the cleaning head to ensure that the fiber end surface is effective but gentle clean.
The One Click Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the One-Click Cleaner into anadapter and push until an audible “click” is heard.
Features
- SC fiber optic cleaning pen fiber optic adapter flange clean cleaner One-fiber cleaner,
- Suitable for SC / FC / ST 2.5mm
- Fiber Optic Cleaning Pen
- One click fiber optic pen type smart cleaner, for cleaning the connector ferrule without nicking or scratching the end face.
- SC/FC/ST and LC/MU
- 2 models available, 2.5mm for SC/FC/ST
- 800+ Cleanings per Unit
- Disposable with 800+ cleanings per unit
- Cleaning system rotates 180 for a full sweep
- This cleaning tool cleans the ferrule end faces, removing dust, oil, and other debris without nicking or scratching the end face.
Explore more products when you click here.
You may also like and follow our Facebook Page: Clusterasia Corp. for more updates.
Related Products
Outdoor Metal OPGW Cable Joint Box Dome Type Aerial Pole Mount Fiber Optic Enclosure Model ADSS
Outdoor Metal OPGW Joint Box Dome Type Aerial Pole Mount Fiber Optic Enclosure Model ADSS
Cable Joint Box is designed for splicing ADSS,OPGW cables and the normal cables, including two to four sleeves for input and output.
Loose storage space makes storage more conveniently, quickly and cable bending radius big enough, avoiding fiber optic extra loss and ensuring transmission performance.
The double sealed designs make Cable Joint Box more reliable. Easy to install and fix on pole (tower) or tubes.
The double sealed designs make Cable Joint Box more reliable. Easy to install and fix on pole (tower) or tubes.
8 ports 16 ports Inline NAP Box FTTH Distribution Box Fiber FTTH Terminal Box 16 Core FTTH Box Fiber Access
8 ports 16 ports Inline NAP Box FTTH Distribution Box Fiber FTTH Terminal Box 16 Core FTTH Box Fiber Access
is used for outdoor, corridor or indoor connection of main cable and cable distribution interface equipment. It is mainly composed of box body, internal structural parts, fiber optic movable connector, optical splitter (optional) and spare accessories.。
Industry-specific attributes
Type: Fiber optic distribution box
Reliable Splicer Fujikura 35S Fusion
Splicer
Fujikura 35S Fusion Splicer
The 35S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 µm coated fibers in the same pass, along with the CT-16 cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 35S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables a one handed operation.
Furthermore, the 35S sheath clamps are mechanically linked to the wind protector, so after splicing is finished, opening the wind protector also opens both sheath clamps for quick sleeve positioning and transfer to the tube heater. The 35S tube heater shrinks sleeves much faster than its predecessor with a nominal ~20 second heat time for 60 mm sleeves down from ~26 seconds. The simultaneous fiber preparation capability, automated sheath clamp opening, and a faster tube heater, combine to lower the overall fusion splicing cycle time by ~30% or more.
OTDR Launch Cable SC/APC-SC/UPC Extension Cable Fiber Jumper Cable Single-mode 500 1000 2000 meters
OTDR Launch Cable SC/APC-SC/UPC Extension Cable Fiber Jumper Cable Single-mode 500 1000 2000 meters
Reliable Fujikura 45S Fusion Splicer - High- Precision & Easy Operation
Fujikura 45S Fusion Splicer
The 45S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 μm coated fibers in the same pass, along with the CT-16A cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 45S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables onehanded operation.
Signal Fire AI-20 Optical Fiber Fusion Splicer Machine
Signal Fire AI-20 Optical Fiber Fusion Splicer
Signal Fire AI-20 is the fourth-generation fiber fusion splicer developed by Signal Fire. It’s the latest generation of fiber fusion splicers designed for full link integration. It combines Signal Fire’s latest research and development of a delayed return electric one-step cleaver with the fiber fusion splicer. It integrates OPM and VFL functions with a 9 IN 1 Signal Fire fiber stripper, a combinable workbench, and a worktable. It becomes a compact, lightweight, and easy-to-operate fiber fusion splicer, which will improve your work.
72 Cores Fiber Patch Panel
72 CORES FIBER PATCH PANEL
The 19-inch rack-mounted end box is a passive component for terminal distribution of trunk cables in fiber-optic communication systems, with tools for easy connection and distribution of fiber optic circuits. We offer 19 Inch Rack Drawer Distribution box (Fiber Patch Panel) and 19 Inch Rack Fixed Distribution box (Fiber Patch Panel)
Fujikura 90S+ Fusion Splicer - Ultimae Precision for Superior Fiber Optic Spacing
Fujikura 90S+ Fusion Splicer
The Fujikura 90S+ core alignment fusion splicer solves common problems seen in the field—from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The Fujikura 90S+ can be use in multiple field splicing applications including bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF® fibers, loose buffer fiber, splice-on connectors, and the list goes on. The speed and accuracy of the 90S+ make it suitable for certain production and specialty environments where high output, tight packaging, and low loss requirements are required.
Fiber Optical Distribution Frame ODF Rack mount and Enclosure 12 24 48 96 144 288 core
₱0
Fiber Optical Distribution Frame ODF Rack mount and Enclosure 12 24 48 96 144 288 core
Buffer Tube Slitter Longitudinal Cable Sheath Cutter
₱0
Buffer Tube slitter Longitudinal Cable Sheath Cutter
Eloik ALK-7000 Optical Time Domain Reflectometer ELOIK OTDR ALK-7000
ALK-7000
Optical Time Domain Reflectometer
CRS310-1G-5S-4S+IN MIKROTIK
CRS310-1G-5S-4S+IN MIKROTIK
10 Gigabit fibre connectivity way over a 100 meters – for small offices or ISPs. Hardware offloaded VLAN-filtering and even some L3 routing on a budget!
RS310-1G-5S-4S+IN is a fantastic tool for anyone working with indoor connections over 100 meters while keeping data loss and ping low. Optical fiber can be a great alternative to copper if you are worried about electromagnetic interference, tampering or eavesdropping.
Reviews
There are no reviews yet.