Call: (02) 8681 9790 (02) 8818 4883
MODEL J2 CABLE LASHER
FEATURES
- Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
MODEL J2 CABLE LASHER ACTUAL APPLICATION
Ordering Information:
| P/N | Description | Wire Dia | Weight |
|---|---|---|---|
| 86070 | J2 Cable Lasher Standard | .045 | 46 lbs. (20.9kgs) |
| 86071 | J2 Cable Lasher Modified for 450 ft. of .065 in. wire | 065 | 46 lbs. (20.9kgs) |
| 86072 | J2 Cable Lasher Modified for 1/2 ” Strand | .045 | 46 lbs. (20.9kgs) |
| 86074 | J2B Cable Lasher Without strand lock and relieved for overlashing | .045 | 46 lbs. (20.9kgs) |
| 28120 | Housing Handle for J2B | 1.5 lbs. (.7kg) | |
| 03165 | Bridle Rope Assembly only | 3 lbs. (1.4kg) | |
| 08189 | Chest only | 19 lbs. (8.6kgs) | |
| J2 Cable Lasher w/Chest (Shipping Weight) | 65 lbs. (29.6kgs) | ||
| 70190 | Towing Lanyard 35 ft. (optional)(250 lbs. WLL) | 6 lbs. (2.7kgs) | |
| 70012 | Lasher Guard “Halo” (optional) | 3 lbs. (1.4kg) |
Explore more products when you click here.
You may also like and follow our Facebook Page: Clusterasia Corp. for more updates.
Related Products
HW NetEngine AR8140-T-12G10XG – Next-Gen 10GE Aggregation Router for Modern Enterprises
Call for Price
HW NetEngine AR8140-T-12G10XG (02353LJW) Enterprise Router
The HW NetEngine AR8140-T-12G10XG (02353LJW) is a high-performance, next-generation enterprise router designed to meet the growing demands of digital transformation, cloud access, and multi-service integration. Engineered for large enterprises, data centers, and service providers, the AR8140-T-12G10XG offers robust forwarding performance, enhanced security, and advanced service capabilities for critical networking environments.
PON Optical Power Meter 1310/1490/1550nm Optimize FTTX Digital Fiber Tester - 3213N
Call for Price
PON Optical Power Meter target at the FTTx application and maintenance. This power meter is able to
simultaneously test and estimate the signals of the voice, data and video. It is an essential and ideal tool
for the construction and maintenance of the PON projects.
PON OPTICAL POWER METER
* Two port straight-through design
* FC/SC general interface
* Automatic wavelength recognition
* Automatic shutdown function
* HD TFT color LCD
FEATURES
（1） It can experiment at Voice, data and video signal synchronous measurement and display on BPON/EPON/GPON.
（2） Providing simultaneous measurement for all three wavelengths on the fiber (1490nm 1550nm,1310nm).
（3） Used in Burst mode measurement of 1310nm upstream.
（4） Use the software connect with PC, setting the threshold, data transfer, and calibration the wavelength.
（5） USB communication port enables data transfer to a PC.1000measurement items can be saved in 3213 PON power meter or computer for data review.
（6） With optical power meter modual, include 850、1300、1310、1490、1550、
1625sixs( 3213AP，3213A without 850nm wavelength）；With visual fault locator modual（3213and3213AV）
（7） Optical power meter and VFL with one port.（only 3213A）
（8） Optional Chinese/English display.
（9） Offers up to 10 different threshold sets in total,Three status LEDs represent different optical signal conditions of Pass, Warn and Fail respectivel
（10） 10 minutes Auto-off function can be activated or deactivated
（11） Good key design,high sensitivity, greatly reducing the volume and weight of the tester.
（12） Different models corresponding to different function, according to own use to choose .
CC 6UB DATA CABINET WALL MOUNT 1 FEET 600mm X 450mm X 330mm
Call for Price
CC 6UB DATA CABINET WALL MOUNT 1 FEET 600mm X 450mm X 330mm
C-Corp 4 ports Optical Receiver and Transmitter, Aerial, 9dB, 47-862 MHZ
₱40,000
C-Corp 4 ports Optical Receiver and Transmitter, Aerial, 9dB, 470862Mhz
- is a kind of new high quality CATV network products. It adopts the reasonable combination of GaAs NEC amplifying module, AGC/MGC function. When input optical power is in the range of -6~+2dBm, output level will be stable and it is characterized by high performance index. Single chip microcomputer controlling LED numeral pipe displays each parameter, which makes CATV network project very easy to debug. Digital and analogue signals can be transmitted at the same time. This is the priority choice in HFC network system construction.
35 in stock
96 CORES ADSS FIBER CABLE 100M SPAN All DIELECTRIC SELF-SUPPORTING AERIAL CABLE
Call for Price
96 CORES ADSS FIBER CABLE 100M SPAN All DIELECTRIC SELF-SUPPORTING AERIAL CABLE
Fiber Optic Cable Pulling Traction Machine
Call for Price
Fiber Optic Cable Pulling Traction Machine
Fiber Optic Cable Pulling Traction Machine. It’s very common for municipalities and telecom enterprises to carry out buried pipeline construction and wiring. However, it is very difficult and tight-schdule in the optical cable construction process. Inevitably, a large amount of manpower is required, plus the project-constructed time is long. Behind this scene, our company has developed an efficient, time-saving and labor-saving cable tractor. it solves a major problem in cable construction.
CCORP Electric Chain Hoist 1t - 10tons - Best Reliable Lifting Solution
Call for Price
CCORP Electric Chain Hoist
A compact, motor-powered lifting device designed to raise and lower heavy loads with precision and ease. Ideal for industrial and commercial use, it features a durable chain, high-efficiency motor, and built-in safety mechanisms for reliable, safe operation.
The primary purpose of an Electric Chain Hoist is to lift, lower, and move heavy loads vertically in a safe, efficient, and controlled manner using electric power. It is widely used in industrial, construction, and commercial settings to reduce manual labor, enhance productivity, and ensure the safe handling of materials and equipment.
Efficient Material Handling: Speeds up lifting operations in warehouses, factories, and assembly lines.
Improved Safety: Minimizes the risk of injury by handling heavy loads mechanically instead of manually.
Precision Lifting: Allows accurate positioning of heavy components during manufacturing or maintenance tasks.
Labor Savings: Reduces the need for multiple workers to lift or move heavy items.
Versatility: Used in a variety of sectors, including automotive, shipping, construction, and logistics.
NAP BOX 32 ports Fiber Optic Splitter Box Nap box for FTTH Network
Call for Price
32 ports NAP BOX 32 ports Fiber Optic Splitter Box Nap box for FTTH Network
RG-ES08 Reyee 8-Port Unmanaged Desktop Switch
Call for Price
RG-ES08 Reyee 8-Port Unmanaged Desktop Switch
The perfect combination of quality & cost-effectiveness
RG-ES08 is a desktop switch tailored for small enterprises, small-scale surveillance and SOHO, which meets the network needs of small enterprise customers. The switch features easy configuration and compatibility with a variety of terminals such as network cameras, printers, PCs, etc., to offer fast deployment experience. RG-ES08 model is equipped with eight Gigabit Ethernet Ports and provides 1.1904Mpps packet forwarding rate.
230KV High Voltage Grounding Set Telescopic Temporary Protective Grounding Equipment
Call for Price
230KV High Voltage Grounding Set Telescopic Temporary Protective Grounding Equipment
The temporary grounding sets are designed for using to protect workers from high voltage electric shock. Suitable for making power failed equipments or temporary short-circuited lines grounded, preventing unexpected power to intrude in and do damage to personnel and equipment.
DVP 740 Fusion Splicer Machine
₱70,000
DVP 740 Fusion Splicer Machine
Capable of ensuring high-quality splicing even in the most unfavorable environment conditions
13 in stock
Reviews
There are no reviews yet.