Call: (02) 8681 9790 (02) 8818 4883
Please Call for price
16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port POE1621HR-2
Order Now
Call for Price
CCTV OEM Cheap 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port POE1621HR-2
The POE1621HR-2 is a cost-effective 16-port 100Mbps PoE network switch, ideal for CCTV and IP surveillance systems. It features 2 Gigabit uplink ports and 1 SFP slot for flexible high-speed connectivity. Supports IEEE 802.3af/at PoE standards with a total power budget suitable for powering multiple IP cameras or PoE devices. Reliable, plug-and-play design for easy deployment.
CCTV OEM Cheap 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port POE1621HR-2
FEATURES – 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port (POE1621HR-2)
- 16*10/100M POE Ports + 2*10/100/1000M Uplink Ports+1*10/100/1000M SFP port
- IEEE 802.3af/at PoE compliant
- Support PoE IP camera, PoE WIFI AP, and PoE IP Phone.
- Up to 15.4W/30W per port for powering PoE-enabled devices.
- One-key Smart: Support three working modes (OFF-Normal, VLAN, Extend-250M);
- Dynamic power control to ensure stable output power (Enhanced).
- Improved anti-interference capability, to solve problems in the installation of grounding devices
- Reliable short-circuit protection to ensure safety.
- Over-voltage and under-voltage protection
- 300W high power
- CCTV OEM Cheap 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port (POE1621HR-2)
- network switch is a multiport network bridge that uses
- MAC addresses to forward data at the data link layer (layer 2) of the OSI model.
- Switches for Ethernet are the most common form of network switch.
- To solve problems in the installation of grounding devices .
SPECIFICATION – 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port
(POE1621HR-2)
| Product Name | 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP port | |||||||||
| Model | POE1621HR-2 | |||||||||
| Connector Type | 16 ports 10/100M POE port + 2 ports Gigabit Uplink Ethernet+1 port Gigabit Uplink SFP port | |||||||||
| Optical | Multi-mode fibre: 1310nm, 2Km Single mode fibre: 1310nm, 20/40 Km 1550nm, 60/80/100/120Km | |||||||||
| Performance Specification | Bandwidth: 9.2 Gbps (non-blocking) | |||||||||
| MAC: 2K | ||||||||||
| Packet Buffer Memory: 1M | ||||||||||
| 100M Packet Forwarding Rate: 0.1488Mpps/port, 1000M Packet Forwarding Rate: 1.488Mpps/port | ||||||||||
| MTBF: 100,000 hours | ||||||||||
| Forwarding Mode | Store-And-Forward | |||||||||
| PoE Standard | IEEE 802.3af/at (each port 15.4W / 30W) | |||||||||
| POE Compatibility | AF/AT | |||||||||
| POE power output | DC48V | |||||||||
| Power Supply | Power input: AC110-264V 50/60Hz; (every country uses a custom power plug) | |||||||||
| PoE power pin | 12+,36- (45+,78- Optional) | |||||||||
| PoE Port Power | 15.4W /30W for each POE port | |||||||||
| PoE Feature | All ports support MDI/MDIX | |||||||||
| Network Protocols | Support IEEE802.3, IEEE802.3u, IEEE802.3x | |||||||||
| Network Media | 10BASE-T: Cat6 UTP (≤250 meter) ; 100BASE-TX: Cat5 or more UTP (≤100 meter); 1000BASE-TX: Cat5 or more UTP (≤100 meter) | |||||||||
| LED Indicator |
| |||||||||
| Working Environment | Operating Temperature: -20°C ~ 55°C. Storage Temperature: -40°C ~ 85°C. Operating Humidity: max 90%, non-condensing | |||||||||
| Transmission Distance | POE transmission distance:100meters, 250meters (when it’s on 10Mbps rate with Cat.6 or more) Uplink transmission distance: 100meters (Uplink RJ45 port). Depend on your SFP module (Uplink SFP port) | |||||||||
| Dimension (L×W×H) | 320 mm*210mm*45 mm | |||||||||
| Warranty | 2 years warranty |
CCTV OEM Cheap 16 Ports 100Mbps PoE Network Switch with Gigabit Uplink and SFP Port (POE1621HR-2)
- PoE – Application
- Schematic Diagram of PoE Power Supply
- Detect: Judge if PD equipment exists
- Switch off: PSE detect if PD equipment power off
- Run: Control and manage
- Power Supply: PSE provide power to PD equipment
- Sort: PSE confirm to power PD equipment
- PoE Power Supply Method
- Power sourcing equipment (PSE)
- Powered Device (PD)
- PD equipment
- Diagram
- Video
- Internet
- PC
Explore more products when you click here: Clusterasia Corp.
You may also Like and Follow our Facebook Page: Clusterasia Corp. For more updates.
Related Products
230KV High Voltage Grounding Set Telescopic Temporary Protective Grounding Equipment
Call for Price
230KV High Voltage Grounding Set Telescopic Temporary Protective Grounding Equipment
The temporary grounding sets are designed for using to protect workers from high voltage electric shock. Suitable for making power failed equipments or temporary short-circuited lines grounded, preventing unexpected power to intrude in and do damage to personnel and equipment.
DVP 740 Fusion Splicer Machine
₱70,000
DVP 740 Fusion Splicer Machine
Capable of ensuring high-quality splicing even in the most unfavorable environment conditions
13 in stock
2 4 6 8 12 16 24 48 96 144 core Fiber Optic Cable GYTY53 Direct burial Double Sheath and Armored Outdoor Optical Fiber Cable
Call for Price
2 4 6 8 12 16 24 48 96 144 core Fiber Optic Cable GYTY53 Direct burial Double Sheath and Armored Outdoor Optical Fiber Cable
CC-FBM02 Fiber Blowing Machine – Ultimate High-Speed Cable Installation for Microducts
Call for Price
CC – FBM02 Fiber Blowing Machine
The CC – FBM02 Fiber Blowing Machine is a next-generation solution designed for the efficient installation of optical fiber cables into microducts. Engineered with precision and built for performance, this compact yet powerful machine is ideal for use in both long-distance and urban fiber-to-the-home (FTTH) installations. The FCST-FBM02 stands out with its ability to handle a broad range of cable and duct sizes, as well as its advanced control system that ensures smooth and accurate cable deployment.
LC-LC OM4 50/125 Multimode Duplex Fiber Patch Cord 10Gb 3mm - 3 meters
Call for Price
LC-LC OM4 50/125 Ultimate Multimode Duplex Fiber Patch Cord 10Gb 3mm -3 meters
- Our high quality OM4 multi-mode fiber cable with LC,FC,AT,FC connectors is perfect for high-throughput applications.
- Support 10Gb up to 300 meters, 40Gb and 100Gb up to 100 meters.
- With an Effective Modal Bandwidth (EMB) of 2000 MHz/km at 850nm.
- OFNR (riser) rated fiber cable is ideal for use in upright shafts that run between floors in the building.
- The small LC connector is perfect for high density network applications.
- Use with LED and VCSEL laser light sources.
- Backward compatible with LED-based 50/125 multimode fiber applications.
C-CORP 400G QSFP DD OPTICAL TRANCEIVER MODULE
Call for Price
C-CORP 400G QSFP DD OPTICAL TRANCEIVER MODULE
Functions and features:
- Compliant with QSFP-DD MSA CMIS Rev5.0, OIF 56G PAM4 and 100G Lambda MSA
- Hot Pluggable QSFP-DD Form Factor
- High-speed Electrical Compliant to IEEE 802.3bs
- 8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
- QSFP-DD port is backward compatible with QSFP+, QSFP28 and QSFP56 modules
- MPO-12/dual-fiber LC interface
- CWDM EML /VCSEL/DFB
C-Corp CC-OTO1 / CC-OTO2 CATV Optical Transmitter
Call for Price
C-Corp CC-OTO1 / CC-OTO2 Optical Transmitter
C-Corp CC-OT01 Series Optical Transmitter is a 1550nm laser transmitting device independently
and fully independent intellectual property. It has high performance, high reliability and excellent performance-price ratio. It can be widely used in all kinds of medium and far Distance digital, analog signal communications, applications include large and medium-sized cable TV trunk and distribution network, CWDM / DWDM systems, optical fiber sensing and security monitoring systems.
C-Corp CC-OT02 Optical Transmitter external modulation optical transmitter products are new high performance 1550nm external modulation CATV optical transmitter. The transmitter is 1U height, can be easily installed in the 19 “rack .1550 transmitter for the 1550 wavelength dual 7dBm light output, the output signal spectral line narrow, in the long-distance transmission, even more advantages. The main device using JDUS, Fujitsu, MITSUBISHI DFB low noise, narrow linewidth, continuous wave laser and JDUS,AVANEX CATV high linearity external modulator with thermoelectric cooler. As the key components adopt the international brand and our company system optimization control technology, SMNP network control technology , So that the machine’s technical performance indicators fully meet the standards of similar imported equipment for cable television and telephone communications, to provide high-quality images, digital or compressed digital signal long distance transmission.
24 PORTS ODF PATCH PANEL OPTICAL DISTRIBUTION FRAME RACK MOUNT 19 INCH STEEL DRAWER TYPE SC UPC SC APC LC UPC LC APC SINGLEMODE SM
Call for Price
24 PORTS ODF PATCH PANEL OPTICAL DISTRIBUTION FRAME RACK MOUNT 19 INCH STEEL DRAWER TYPE SC UPC SC APC LC UPC LC APC SINGLEMODE SM
Signal Fire Ai30 Fusion Splicer Machine
Call for Price
Signal Fire Ai30 Fusion Splicer Machine
The AI-30, the fourth generation fiber fusion splicer developed by Signal fire, is the latest generation of fiber fusion splicer designed for full link integration. It combines Signal fire’s latest research and development of a delayed return electric one-step cleaver with fiber fusion splicing, while integrating OPM and VFL functions. Combined with a nine in one signal fire fiber stripper, a combinable workbench and worktable, it truly becomes a compact, lightweight, and easy to operate fiber fusion splicer, which will greatly improve your work efficiency.
C-Corp 4 ports Optical Receiver and Transmitter, Aerial, 9dB, 47-862 MHZ
₱40,000
C-Corp 4 ports Optical Receiver and Transmitter, Aerial, 9dB, 470862Mhz
- is a kind of new high quality CATV network products. It adopts the reasonable combination of GaAs NEC amplifying module, AGC/MGC function. When input optical power is in the range of -6~+2dBm, output level will be stable and it is characterized by high performance index. Single chip microcomputer controlling LED numeral pipe displays each parameter, which makes CATV network project very easy to debug. Digital and analogue signals can be transmitted at the same time. This is the priority choice in HFC network system construction.
35 in stock
RG-ES08 Reyee 8-Port Unmanaged Desktop Switch
Call for Price
RG-ES08 Reyee 8-Port Unmanaged Desktop Switch
The perfect combination of quality & cost-effectiveness
RG-ES08 is a desktop switch tailored for small enterprises, small-scale surveillance and SOHO, which meets the network needs of small enterprise customers. The switch features easy configuration and compatibility with a variety of terminals such as network cameras, printers, PCs, etc., to offer fast deployment experience. RG-ES08 model is equipped with eight Gigabit Ethernet Ports and provides 1.1904Mpps packet forwarding rate.
1x2 Fiber Optic FBT Splitter – No Connector – Unbalanced Split Ratio
Call for Price
1×2 Fiber Optic FBT Splitter – No Connector – Unbalanced Split Ratio
The 1×2 Fiber Optic FBT (Fused Biconical Taper) Splitter with an unbalanced split ratio and no connectors is a cost-effective, reliable solution for optical power distribution in fiber optic communication systems. Designed using time-tested fused fiber technology, this splitter divides one input fiber signal into two outputs with a customized power distribution ratio, ideal for applications that require unequal optical power to different outputs.
Reviews
There are no reviews yet.