Call: (02) 8681 9790 (02) 8818 4883
OM3 Fiber Optic Pigtails LSZH 0.9mm 50/125 Multimode Simplex Bunch SC/UPC LC/UPC 12 Fibers Pigtail
OM3 Fiber Optic Pigtails are designed to support fusion and mechanical splicing for fiber cabling systems. They provide a fast way to make communication devices in the field.
The OM3 Fiber Optic Pigtails bend-insensitive fiber optic pigtails have less attenuation when bent or twisted than traditional fiber optic pigtails, making installation and maintenance more efficient.
A fiber optic pigtail is a type of fiber optic cable with only one end that has a factory-terminated connector and the other end exposed as bare fiber. A fiber optic pigtail is typically used for field termination with a mechanical or fusion splicer. When compared to field-installed rapid termination or epoxy and polish connections, pre-terminated optical pigtails with connectors save time while providing improved performance and reliability.
The manner in which fiber optic cables are connected to the system is critical to the network’s success. Optical signals can travel across the fiber optic network with minimal attenuation and return loss if done correctly. Fiber optic pigtails are an excellent technique to link optical fibers, and they are employed in a high percentage of single-mode applications. This topic covers the fundamentals of fiber optic pigtails, such as pigtail connection types, fiber pigtail specifications, and fiber optic pigtail splicing techniques.
Fiber Pigtail Specifications
A fiber optic pigtail is a fiber optic cable with one end terminated with a factory-installed connector and the other end unterminated. As a result, the connector side can be connected to equipment, while the other side is fused in the case of fusion splicing and a mechanical connection in the case of mechanical splicing optical fiber cables. Fiber-optic pigtails are used to connect fiber-optic cables using fusion or mechanical splicing. High-quality pigtail cables, combined with proper fusion splicing techniques, provide the highest performance for fiber optic cable terminations. Fiber optic pigtails are commonly encountered in fiber optic management equipment such as an ODF (optical distribution frame), a fiber terminal box, and a distribution box.
Types of Fiber Optic Pigtails
There are several types of fiber optic pigtails available: pigtail connector types include LC fiber pigtails, SC fiber pigtails, and ST fiber pigtails, among others. There are two types of fiber optic pigtails: singlemode fiber optic pigtails and multimode fiber optic pigtails. In terms of fiber count, 6 and 12 fiber optic pigtails are available on the market.
Types of Fiber
Singlemode (colored yellow) and multimode (colored aqua or violet) fiber optic pigtails are available. Multimode fiber optic pigtails are made of 62.5/125 micron or 50/125-micron bulk multimode fiber cables that are terminated at one end with multimode fiber optic connectors. Fiber optic pigtails for 10G multimode fiber cables (OM3 Fiber Optic Pigtails or OM4) are also available. Typically, the jacket color of 10G OM3 Fiber Optic Pigtails and OM4 fiber optic pigtails is aqua. Singlemode fiber pigtail cables are made of 9/125 micron singlemode fiber cable and are terminated at one end with single-mode fiber connectors.
Choosing the Right Fiber Pigtail
When choosing a fiber pigtail, there are several factors to consider, including:
Compatibility: The pigtail must be compatible with the optical components that it will be connecting.
Length: The pigtail must be the correct length to accommodate the distance between the two optical components.
Connector type: The pigtail must have the same connector type as the optical components that it will be connecting.
Other factors: Other factors to consider may include the pigtail’s performance specifications, such as its attenuation and bandwidth.
Features
• Low insertion loss
• High back reflection loss
• Stable capability and high reliability
• Superior qualified standard PC polishing
• Boots in a variety of colors
• PVC jacket as default, LSZH optional
• 0.9mm as default
• 100% inspected for optical characteristics before shipment
• Customized specifications are available
Product Name | OM3 SC/UPC Pigtails |
Optical Connector | SC/UPC |
Fiber Type | OM3 Simplex |
Jacket Material | LSZH |
Jacket Color | Aqua |
Length | 1.5m |
Insertion Loss | ≤0.3dB |
Return Loss | ≥50dB |
Cable Diameter | 0.9mm |
Product Name | OM3 LC/UPC Pigtails |
Optical Connector | LC/UPC |
Fiber Type | OM3 Simplex |
Jacket Material | LSZH |
Jacket Color | Aqua |
Length | 1.5m |
Insertion Loss | ≤0.3dB |
Return Loss | ≥50dB |
Cable Diameter | 0.9mm |
Explore more products when you click here.
You may also like and follow our Facebook Page: Clusterasia Corp. for more updates.
Related Products
Reliable Splicer Fujikura 35S Fusion
Call for Price
Splicer
Fujikura 35S Fusion Splicer
The 35S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 µm coated fibers in the same pass, along with the CT-16 cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 35S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables a one handed operation.
Furthermore, the 35S sheath clamps are mechanically linked to the wind protector, so after splicing is finished, opening the wind protector also opens both sheath clamps for quick sleeve positioning and transfer to the tube heater. The 35S tube heater shrinks sleeves much faster than its predecessor with a nominal ~20 second heat time for 60 mm sleeves down from ~26 seconds. The simultaneous fiber preparation capability, automated sheath clamp opening, and a faster tube heater, combine to lower the overall fusion splicing cycle time by ~30% or more.
Circular Pole Clamp, hot dipped galvanized, CA type 5-7" diameter
₱0
Circular Pole Clamp, hot dipped galvanized, CA type 5-7″ diameter
Outdoor Metal OPGW Cable Joint Box Dome Type Aerial Pole Mount Fiber Optic Enclosure Model ADSS
Call for Price
Outdoor Metal OPGW Joint Box Dome Type Aerial Pole Mount Fiber Optic Enclosure Model ADSS
Cable Joint Box is designed for splicing ADSS,OPGW cables and the normal cables, including two to four sleeves for input and output.
Loose storage space makes storage more conveniently, quickly and cable bending radius big enough, avoiding fiber optic extra loss and ensuring transmission performance.
The double sealed designs make Cable Joint Box more reliable. Easy to install and fix on pole (tower) or tubes.
The double sealed designs make Cable Joint Box more reliable. Easy to install and fix on pole (tower) or tubes.
Comway C108 Fiber Optic Precision Fiber Optic Cleaver fusion Splicer Compatible C108 Optical Fiber Cleaver
Call for Price
Comway C108 Fiber Optic Precision Fiber Optic Cleaver
SC to SC UPC/APC/OM3/OM4 Coupler, Simplex / Duplex Fiber Optical Adapters Cable Connectors SM MM Fiber Flange FTTH Adapter
Call for Price
SC to SC UPC/APC/OM3/OM4 Coupler, Duplex Fiber Optical Adapters Cable Connectors SM MM Fiber Simplex Flange FTTH Adapter
Comway C10s Fusion Splicer Machine
Call for Price
Comway C10S is a powerful tool for splicing any fiber optic cable. Comway C10S can be used in various working conditions for field fiber splicing. Due to the long battery life, the Comway C10S fusion splicer keeps operating even in the toughest environments.
8 ports 16 ports Inline NAP Box FTTH Distribution Box Fiber FTTH Terminal Box 16 Core FTTH Box Fiber Access
Call for Price
8 ports 16 ports Inline NAP Box FTTH Distribution Box Fiber FTTH Terminal Box 16 Core FTTH Box Fiber Access
is used for outdoor, corridor or indoor connection of main cable and cable distribution interface equipment. It is mainly composed of box body, internal structural parts, fiber optic movable connector, optical splitter (optional) and spare accessories.。
Industry-specific attributes
Type: Fiber optic distribution box
Signal Fire AI-20 Optical Fiber Fusion Splicer Machine
Call for Price
Signal Fire AI-20 Optical Fiber Fusion Splicer
Signal Fire AI-20 is the fourth-generation fiber fusion splicer developed by Signal Fire. It’s the latest generation of fiber fusion splicers designed for full link integration. It combines Signal Fire’s latest research and development of a delayed return electric one-step cleaver with the fiber fusion splicer. It integrates OPM and VFL functions with a 9 IN 1 Signal Fire fiber stripper, a combinable workbench, and a worktable. It becomes a compact, lightweight, and easy-to-operate fiber fusion splicer, which will improve your work.
Reliable Fujikura 45S Fusion Splicer - High- Precision & Easy Operation
Call for Price
Fujikura 45S Fusion Splicer
The 45S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 μm coated fibers in the same pass, along with the CT-16A cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 45S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables onehanded operation.
12 PORTS ODF SC APC OPTICAL DISTRIBUTION FRAME 19 inch Rack Mount Fiber Optic Patch Panel Steel Black Drawer
Call for Price
12 PORTS ODF SC APC OPTICAL DISTRIBUTION FRAME 19 inch Rack Mount Fiber Optic Patch Panel Steel Black Drawer
Rack Mount type Fiber optic enclosure patch panel is an integrated unit for Fiber distribution, Clusterasia Corp offers wall mounted Fiber optic patch panel and rack mounted Fiber optic patch panels, this equipment function is to fix and manage the Fiber optic cables inside the box as well as provide protection.
Features:
1) Standard size, light weight and reasonable structure
2) Splice tray inside changeable
3) 19-inch standard size, light in weight and robust structure
4) Suitable for ribbon and single Fiber
5) Various panel plate to fit different adapter interface
6) Front mark on the plate is easy for identification and operation
7) 12/24, with or without Fiber optic pigtails and adapters
8) Easy for management and operation
Application
1) Telecommunications subscriber loop
2) Fiber to the home (FTTH)
3) LAN/WAN
4) CATV
2 ports 4 ports Optical FTTH Terminal Box Outdoor Terminal box Splitter Fiber Distribution Box
Call for Price
2 ports 4 ports Optical FTTH Terminal Box Outdoor Terminal box Splitter Fiber Distribution Box
CCORP 48 PORTS OPTICAL DISTRIBUTION BOX WALL MOUNT OUTDOOR ODF ODB SINGLE DOOR
Call for Price
CCORP 48 PORTS OPTICAL DISTRIBUTION BOX WALL MOUNT OUTDOOR ODF ODB SINGLE DOOR
48 Core Fiber Distribution Box is a weatherproof enclosure used for organizing, splicing, and distributing up to 48 fiber optic cores in FTTH or FTTx networks. It supports SC/LC adapters, includes splice trays, and provides secure cable management for indoor or outdoor wall or pole-mounted installations.
Reviews
There are no reviews yet.